PLUS+1 User Forum

PLUS+1 Software => Displays => Topic started by: samuelhj on March 09, 2025, 12:14:32 AM

Title: DM430E compile issues, error 446
Post by: samuelhj on March 09, 2025, 12:14:32 AM

Hello.

This issue seems to pop up every once in a while, I'm doing modification on a program I did over 2 years ago. The error message I get during compile is
"*** ERROR 446 *** [PLUS1_IDE] PLC Code Compilation Failure {Convert PLCopenXML -> CCP}"

Usually it works to just remove Guide Extensions.xml and re add it, but this time it doesn't seem to work at all. This project compiled fine some months ago.

Any tips on how to debug this properly?

Title: Re: DM430E compile issues, error 446
Post by: Tor on March 10, 2025, 08:21:51 AM

Hello samuelhj,

I have looked in the reported issues regarding this error, but can't find a good solution.
Please contact PLUS+1 Helpdesk: https://www.danfoss.com/en/campaigns/dps/plusplus1-support-form/t (https://www.danfoss.com/en/campaigns/dps/plusplus1-support-form/t)
They would probably have a look at the application and what version of tool you are using.

Thank you.

Title: Re: DM430E compile issues, error 446
Post by: samuelhj on March 10, 2025, 07:58:18 PM

Hi Tor. Thanks for the reply, the link you provided doesn't work however. I did find it through the plus1+ Guide software though and submitted an error report. It's very strange that this error is popping up again and again with no proper solution.

Title: Re: DM430E compile issues, error 446
Post by: Tor on March 11, 2025, 06:40:26 AM

Hi,

I'm sorry.  I guess there was a bit more at the end that shouldn't be there:
https://www.danfoss.com/en/campaigns/dps/plusplus1-support-form/ (https://www.danfoss.com/en/campaigns/dps/plusplus1-support-form/)

By the way.
You can always find the link to PLUS+1 Helpdesk in all the tools.  Help > Support > PLUS+1 Support Webpage.
In PLUS+1 Update Center there is a link on the right side after clicking "Select files manually".


Have a nice day.